Room package · RG-1
Kitchen
A working galley: about 13 ft of counter, a stainless sink, induction cooking, a full fridge and freezer and a tall pantry. No open flame underground.
- No open flame. induction and convection cooking, so nothing burns the air you are breathing
- Real counter space. about 13 ft of solid-surface counter on welded steel frames
- Cabinets that stay shut. positive latches on every upper, for trucking and for shaking ground
- Built and tested before it ships. plumbed, flood tested and leak tested in our shop
| Layout | L-shaped galley with a 30 in work aisle; tall pantry on the third wall |
|---|---|
| Cooking | 2-burner induction and a convection microwave; no open flame |
| Cold storage | About 10 cu ft fridge and freezer, 12V/120V |
| Counter | About 13 ft of solid surface |
| Power | About 2 to 4 kWh a day with daily cooking |
| Added weight | About 1,150 lb, shipped inside the cube |
Floor plan
Laid out to fit
a 9 ft room.
About 8 ft 10 in square inside the finished walls. Entry from the next cube at the bottom; the yellow bar is the second portal, capped for a future cube.
What is included
- Counter frames: Welded steel counter frames on wall clips, L-shaped
- Base cabinets: About 13 ft of marine-grade PVC base cabinets
- Counters: Solid-surface counters with integral backsplash
- Upper cabinets: About 8 ft with positive latches
- Tall pantry: Freestanding pantry cabinet on bolted brackets
- Sink and faucet: Stainless single bowl, low-flow faucet
- Cooktop: 2-burner induction cooktop
- Convection microwave: Built in under the upper cabinets
- Refrigerator and freezer: Efficient 12V/120V, about 10 cu ft, ships braced in place
- Fire safety: Kitchen fire extinguisher and fire blanket
- Range hood: Recirculating hood with grease and carbon filters, tied to the air system return
- Lighting and outlets: Under-cabinet LEDs, GFCI outlet strip, dedicated cooktop circuit
- Wet-wall chase and waterproofing: 4 in chase behind the sink run, membrane and flash cove at the sink
- Supply, drain and lift box: PEX branch, ABS drain with grease trap, sealed lift pump under the sink
- Leak protection: 2 leak sensors and a motorized shutoff
How it is built
Built in our shop, inside the cube: wet-area walls, plumbing, wiring, fixtures and cabinets, then pressure tested, flood tested and leak tested. On site, your installer snaps the water, drain, power and air jumpers together at the cube joint and runs every fixture.
Upgrades
| Dishwasher drawer 18 in, about 3 gallons a load | +$1,400 |
|---|---|
| Chest freezer for long-term storage, 7 cu ft | +$900 |
| Furnished add-on cookware, utensils, dishes, storage containers, kettle, blender, manual can opener | +$1,500 |
Build it bigger
- In a CUBE 20: a full kitchen and dining room together
- Pair with a Food and Water Storage cube next door
Where a fixture is also listed in your Plumbing or Waste system, it is charged once; your written quote confirms it. Package prices are preliminary, November 2026, and confirmed in writing after the site visit.